20141126 180 Gallon Reef Ready Tank Build part 5

Now all the livestocks in!

I am spreading all three clams into three corners. Built two mounts of rock work to hide the overflow columns. And the wave maker hides perfectly in the corner.

20141125 180 Reef Ready Tank Build part 4

The LED light arrived and installed. All the plumbing are also in place. The cloudy crust on the front glass is just salt crystal when the tank was laying on its side waiting for the paint to dry.

I will be using two Mag 7 as return pumps, and also 2X 200W heaters. I have learned from experience to have 2X of these as a preventative measure in case one of them fails, I would still have one working. The general rule is to have multiple mechanisms that are considered "lifeline" for your tank, such as pump, heater, etc.

20141124 180 Gallon Reef Ready Tank Build Part 3

I spent day 1 of my vacation in the garage building the canopy frame. This was made of .5X2 and .5X1 wood. All I have to say is it's not easy doing the whole thing with one person and sub-par tools

The frame fits well over the tank. I plan to hang 3X 150W LED lights.

20141120 180 Gallon Reef Ready tank build

While waiting for the 180 gallon tank's paint to dry, I took the opportunity to also paint the back panel of the stand and the back of the 75 gallon tank, which I will be placing underneath the 180 as a sump.

Tank Stand upright while the paint dries

I am experimenting a "compartment free" sump, where the water is allowed to flow freely through without needing to flow through compartments. But I am building a media container within the sump and also act a as divider for any rock, macro algae, and possible livestock I place down here from the skimmer and the return pumps.

open divider for the sump

20141118 180 Gallon Reef Ready Tank Build part 1

I had the opportunity to obtain a briefly used 180 Gallon Reef Ready tank with built stand from a friend. I will be putting together a series of this build. First of all, if you are looking to obtain a tank of this size, please be sure to have enough muscle help- the tank weights 330b dry. I actually had to go on craigslist to find a couple big boys from a moving company to help me move this, especially to bring it down the stairs! The tank is measured 6' X 2' X 2' so you should also make sure whatever room you want to put it into will either be a straight shot or have enough room for turning, not to mention taking doors out, etc.

Painting back of tank, to preserve paint, I used masking tape to mask out the overflow sections

I purchased a 75 gallon tank to use as sump  ( you can see in the photo below). So the estimated total water volume would be around 230 gallon. The first thing I had to do is to paint the back of the tank. Although painting is unnecessary, I find it less distracting to have the back of tank be in a darker, solid color than seeing the wall and the wires hanging behind. After the tank is painted, I left it on the spot to dry for 3 days.
In the meanwhile, I also install the bulkhead for the overflow onto the tank while it's on its side. Because drying to install the bulk head upside down when the tank is already on the stand will be a much tougher job.

See the 75 Gallon sits perfectly under the 180 Gallon stand.

Setting up seahorse tank 1

So my wife and I have been talking about setting up a real peaceful species tank with seahorse. A friend from local reef group is selling his 20g drilled reef ready setup so I picked up this used unit.

It's a traditional 20g high with the top rim removed, in its place is a custom made screen to prevent jumpers. The overflow is built in but no plumbing in place.

My weekend assignment was to collect a 10 g tank to be used as sump. Bought plexy glass to build buffers and also purchased pvc plumbing parts.

I took a long time planning the pipes including valves and joints for easy moving, cleaning, and feeding time water flow control.